Produkty dla suszenie budowlane (19)

Self-leveling industrial floor of strength class C50-F10-A9 in accordance with EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 400 is the perfect solution for areas with the highest demands on resilience and environmental protection. Choose for quality, sustainability and performance with Maleki-IFS 400. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1410

Meist ist die Sprühtrocknung für unsere Kunden aus der Baustoffindustrie das optimale Verfahren. Wässrige Lösungen, Emulsionen oder Suspensionen werden dabei effizient bei genau definierten Temperaturbedingungen getrocknet. Während des Prozesses werden die Flüssigkeiten zu feinen Tröpfchen verdüst und durch den kurzen und intensiven Wärmeaustausch mit der Trocknungsluft in pulverförmige Partikel mit Teilchengrößen zwischen 20 und 200 µm verwandelt. Mittels Sprühtrocknung stellen wir heute beispielsweise Verflüssiger, Abbindeverzögerer und Hydrophobiermittel her – angepasst an Ihre Anforderungen und Bedürfnisse. schonende Trocknung:Hohlkugeln verbessertes Auflöseverhalten:verbesserte Redispergierbarkeit

Merkmale Sekundenschnelles Bestimmen des Feuchtigkeitsgehaltes von Hölzern und Baustoffen Geeignet für Hölzer und Baustoffe zwischen 200 und 3000 kg/m³ Die Messung erfolgt zerstörungsfrei Direkte Anzeige der Feuchtigkeit in % Die Grenzwerte für Feuchtigkeitswerte sind frei programmierbar Messwerte über Hold-Taste einfrierbar Technische Daten Messbereich Holz0 - 80 % Messbereich Baustoffe0 - 50 % Ablesung0,1 % Messtiefe Suchmodus5,0 cm Messtiefe Nadelmodus1,2 cm BatterietypAAA Anzahl Batterien4 Arbeitstemperatur0°C - 50°C Gewicht175 g Garantie / Monate24 Lieferumfang Koffer Batterien Alkaline Einstecknadeln Bedienungsanleitung

Drybloc 28WF is an acoustic overlay treatment board with a T&G profile. Made from reinforced cement fibre board of flat surface, reinforced by natural minerals on both sides. These dry-fit screed replacement panels at only 28mm thick offer minimal floor height and save on drying times compared to traditional screeds. Drybloc 28WF high density provides excellent airborne sound performance through many types of separating floors, along with impact sound reduction due to its acoustic resilient layer (WF) wood fibre. It’s top layer, is a high performing multipurpose building board that’s designed purposely to provide fireproof, acoustic and waterproof protection, with very high dimensional stability which makes it a high performance alternative to Gypsum and Cement Particle for any construction type.

One-component mineral filling and reprofiling mortar for the preparation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 240 is a universal waterproofing mortar for a wide range of applications. The material is an ideal supplement for waterproofing work in thicker layers and can be used in combination with Maleki-DS 220. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1329

Shrinkage-free fast-setting mortar for construction. Hardens fast and with low tension. Can be mixed with quartz sand for higher layer thickness. Maleki-VM 530 is ideal for filling holes and cavities. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1442

One-component mineral waterproofing slurry. For the preparation of a waterproof coating on concrete and other cementitious substrates. Maleki-DS 220 is a universal waterproofing mortar for a wide range of applications. Thanks to its high waterproofness and durability, it can be used even under the most difficult conditions. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1314

Self-leveling design floor coating of class C40-F10-A12 in accordance with EN 13813. Hardens fast and with low tension in a layer thickness of 2 – 40 mm. Maleki-DFS 430 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1433

Innovative waterproofing with high chemical resistance for canal and industrial construction. Waterproof up to 1.5 bar at a layer thickness of 4 mm. Maleki-SWP 270 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected against stress for longer against stresses that occur. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1312

White binder for self-compacting Terrazzo floors. Hardens fast and with low tension with a layer thickness of up to 60 mm. Maleki-Terrazzo Binder is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. Maleki-Terrazzo Binder can be used to create individual and unique decorative floor surfaces. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1448

Self-leveling flowing screed of strength class C40-F7 in accordance with EN 13813. Hardens with low tension with a layer thickness of 5 – 70 mm. Maleki-FEC 370 is ideal for surfaces where a cost-effective solution for higher layer thicknesses is required. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1429

Versatile environmentally friendly repair mortar for concrete and masonry. For repair and coating work. Maleki-RM 500 is ideal for filling holes and cavities, especially on wall surfaces. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1416

White or colored, self-leveling design floor of class C40-F10-A12 according to EN 13813. Hardens fast and with low tension in a layer thickness of 1 – 30 mm. Maleki-DFS 410 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1415

Easy-to-use, self-leveling floor coating of strength class C35-F7-A22 in accordance with EN 13813. Hardens with low tension in a layer thickness of 2 – 50 mm. Maleki-BV 310 is ideal for surfaces where a cost-effective solution is required. Suitable both as a levelling layer and as a final coating for lighter loads. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1412

Self-leveling, flexible floor mortar for critical substrates. Can be used as an intermediate layer on cracked surfaces. Maleki-FS 440 is used wherever cracked substrates make processing with conventional levelling compounds impossible. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1413

High performance, environmentally friendly silicate mortar for sewage water areas. Extreme resistance against chemicals in the range of pH 0 – 14. Maleki-SBS 860 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected for longer against stresses that occur. The material is an ideal supplement for work in higher layer thicknesses and can be used in combination with Maleki-SWP 270. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1520

Innovative and environmentally friendly smoothing mortar. Hardens fast and with low tension with layer thickness up to 30 mm. Maleki-SM 735 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1515

High performance and extreme acid resistant mortar for protection of mineral substrates in acid-proof installations and industrial areas. Extreme high chemical resistance at the range of pH 0 – 14 according to EN 12808. Maleki-TPC 200 sets new standards in the protection of mineral surfaces against high acid loads and extreme thermal stresses. Maleki-TPC 200 can withstand both concentrated acids and temperatures of up to 1350°C. Both existing and new concrete surfaces can thus be permanently protected. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1310

Self-leveling industrial floor for high chemical and thermal load. Class C50-F10-A12 according to EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 500 is the perfect solution for areas with the highest demands on mechanical, chemical and thermal resistance. Choose for quality, sustainability and performance with Maleki-IFS 500. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1435